H3C SFP-GE-20-SM1310-BIDI Compatible 1G SFP Transceiver Module

The SFP-GE-20-SM1310-BIDI compatible module is intended for H3C platforms requiring a 1G SFP transceiver. It specifies wavelength 1310nm-TX/1550nm-RX, reach 20km with Simplex LC/UPC through SMF.

OEM Part Number: SFP-GE-20-SM1310-BIDIHT Part Number: SFP-1G35-BX20

Product Highlights

• Compatible alternative to H3C SFP-GE-20-SM1310-BIDI
• 1G connectivity at 1.25Gbps
• Optical wavelength: 1310nm-TX/1550nm-RX
• Specified reach: 20km
• Simplex LC/UPC / SMF interface
• Digital diagnostic monitoring: Supported
• Operating temperature: 0 to 70°C (32 to 158°F)

This BiDi interface is useful where only one fiber strand is available between two sites or racks. It must be paired with the complementary wavelength direction: one end transmits on the wavelength that the other end receives. Verify the paired part number, connector polish and fiber plant before installation, and measure link loss against the specified optical budget.

Before deployment, check the host port type, supported data rate and firmware requirements. The 1G interface configuration must match the remote equipment; sharing a SFP housing alone does not make two transceiver types interoperable.

The module is programmed for equipment that recognizes the SFP-GE-20-SM1310-BIDI part number. Before shipment, we check EEPROM identification, link establishment and diagnostic readouts, then verify transmit and receiver performance against the stated optical specifications. Host hardware and software revisions can affect third-party module acceptance, so customers can provide the switch model and software release for a compatibility check before ordering.

Quote HT part number SFP-1G35-BX20 together with OEM part number SFP-GE-20-SM1310-BIDI and the required quantity. Standard modules use our factory label; neutral labels, customer-branded packaging and project-specific compatibility coding are available on request. For mixed-brand installations, select the corresponding brand-specific page instead of assuming one EEPROM version fits every platform.

Each unit undergoes optical performance checks, compatibility verification and visual inspection before packing. Modules are supplied in protective blister trays or anti-static packaging and then cartoned for transport. Custom labels and project packing lists can be added for volume orders.

Standard products normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.