Skip to content
You are here:

Cisco SFP-H10GB-ACU Compatible 10G SFP+ Active Copper Twinax Cable

Cisco SFP-H10GB-ACU Compatible 10G SFP+ Active Copper Twinax Cable

Built for hosts that recognize SFP-H10GB-ACU, this HT-manufactured direct-attach ACC assembly delivers 10G direct-attach connectivity. It combines the connector ends and cable into one tested assembly, with 1m (3ft) covered by this series page.

Series Part Number: SFP-H10GB-ACUHT Part Number: SFP-H10GB-ACU

Product Highlights

  • HT-manufactured compatible alternative for Cisco SFP-H10GB-ACU
  • 10G aggregate connectivity at 10Gbps
  • Active Twinax
  • Length configurations covered: 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft) and 10m (33ft)
  • Conductor specification: 30AWG
  • Power consumption: ≤0.5W

Available Lengths and Corresponding Part Numbers

Each link below opens the separate product page for that physical length and its corresponding OEM part number. Select the exact assembly required by the managed route and keep its length-specific part number on the purchase order; different length codes are not interchangeable options.

1m (3ft) — SFP-H10GB-ACU1M 3m (10ft) — SFP-H10GB-ACU3M 5m (16ft) — SFP-H10GB-ACU5M 7m (23ft) — SFP-H10GB-ACU7M 10m (33ft) — SFP-H10GB-ACU10M

Compatible OEM Part Numbers

  • SFP-H10GB-ACU1M
  • SFP-H10GB-ACU3M
  • SFP-H10GB-ACU5M
  • SFP-H10GB-ACU7M
  • SFP-H10GB-ACU10M

Specifications

Cisco CompatibleSFP-H10GB-ACU1M
ManufacturerHT
HT Part NumberSFP-H10GB-ACU
Connector TypeSFP+ to SFP+
Max Data Rate10Gbps
Minimum Bend Radius23mm
Wire AWG30AWG
Cable Length1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft) and 10m (33ft)
Jacket MaterialPVC (OFNR)
Cable TypeActive Twinax
Temperature0 to 70°C (32 to 158°F)
Power Consumption≤0.5W
Power Supply3.3V
Protocols1x InfiniBand QDR, DDR, SDR, 10 Gigabit Ethernet, Fibre Channel

Cisco 10G Cable Models

Related cable series are selected by host compatibility, interface configuration, speed and cable technology. Check the complete part number and required breakout arrangement before ordering.

SFP-H10GB-ACU | ACC SFP-10G-AOC | AOC, 10G SFP-H10GB-CU | DAC, 10G SFPP10-AO01-I | AOC, 10G

Compatible Brands and Cable Part Numbers

These series share the same verified interface and hardware signature. Host identification and compatibility coding remain brand-specific, so select the version intended for your equipment.

CiscoSFP-H10GB-ACU Arista NetworksCAB-SFP-SFP BrocadeXBR-TWX-0101 Extreme Networks10GB-AC01-SFPP GenericSFP-10G-AC IBM95Y0323 Juniper NetworksEX-SFP-10GE-DAC-1MA

Applications and Deployment

ACC assemblies use active copper signal conditioning to extend practical copper-link reach while retaining a direct-attach installation. They suit high-density switch and accelerator connections where the host supports the stated active-cable type and power requirement.

The the stated connector configuration interface and 10G data rate must match the equipment at both ends. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

Cisco Compatibility and Testing

The assembly is configured for equipment that recognizes the SFP-H10GB-ACU series. Before shipment, we check connector identification, link establishment and electrical link stability, signal integrity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

Ordering Information

Quote HT part number SFP-H10GB-ACU, the required length from 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft) and 10m (33ft), and the OEM part number used by your equipment. The length-specific OEM identifiers above link to their own product pages so each reference can be ordered separately.

Frequently Asked Questions

Is this an original Cisco cable?

No. It is an HT-manufactured compatible cable for equipment that specifies SFP-H10GB-ACU, not an original Cisco-branded product.

Which lengths are covered by this product page?

This series page covers 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft) and 10m (33ft). These are the length configurations identified from the source product records; contact us if a different project length is required.

Can this ACC cable connect different port speeds or breakout configurations?

Only when both host ports support the exact aggregate rate, lane mapping and breakout mode stated in the specifications. Confirm the equipment models before connecting unlike interface versions.

Does the cable need separate modules at each end?

No. The connector ends and cable form one complete direct-attach assembly. Do not attempt to detach the ends or treat the assembly as two independent modules.

Quality Assurance and Packaging

Every ACC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Shipping and Lead Time

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.

 

Get a quick quote

Please write to sales@huihongfiber.com, we will reply as soon as possible.


Huihong Technologies

Add:6F,1st Bldg,ZYT industrial park, Shiyan area,Shenzhen,China
Email:info@huihongfiber.com
Tel: 86.755.61230063
Specialized fiber optic products manufacturer.

News and Exhibitions

Company news and exhibitions schedules for this year and next year. click here for details .
Thank you for visiting with Huihong Technologies.

Fiber Optic Applications

  • Fiber Optic Interconnect
  • Data centers
  • Military Fiber Optics
  • Medical Fiber Optics
  • Broadcast Fiber Optics

Customer Support

customer support
Thank you for the inquiry, please email sales@huihongfiber.com, we will reply to you asap.