HPE ProCurve SFP-H10GB-CU Compatible 10G SFP+ Passive Copper Twinax Cable for HPE Aruba and OfficeConnect Switch Series

This HPE ProCurve SFP-H10GB-CU compatible DAC cable provides 10G connectivity through a direct-attach interface. It is a passive copper twinax connection without separate optical modules or fiber patch cords. The series configurations covered on this page are 1m (3ft) and 3m (10ft).

Series Part Number: SFP-H10GB-CUHT Part Number: SFP-H10GB-CU

Product Highlights

• HT-manufactured compatible alternative for HPE ProCurve SFP-H10GB-CU
• 10G aggregate connectivity at 10Gbps
• Passive Twinax / Copper
• Length configurations covered: 1m (3ft) and 3m (10ft)
• Conductor specification: 30AWG
• Power consumption: ≤0.1W

• SFP-H10GB-CU1M
• SFP-H10GB-CU3m

Passive DAC assemblies are normally used for short switch-to-switch, switch-to-server and rack-adjacent links. They draw very little power and avoid separate optical components, but the selected length must remain within the host and cable specification.

The the stated connector configuration interface and 10G data rate must match the equipment at both ends. The source application is listed as 10G Ethernet. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

The assembly is configured for equipment that recognizes the SFP-H10GB-CU series. Before shipment, we check connector identification, link establishment and electrical link stability, signal integrity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

This series is ordered by the base HT part number SFP-H10GB-CU plus length and compatibility requirement. Available source configurations documented on this page are 1m (3ft) and 3m (10ft); other lengths can be discussed with the factory with each length-specific OEM reference reviewed under its own product configuration.

Every DAC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.