SFP+ to SFP+-10G-ACC-7M23FT 10G SFP+ Active Copper Twinax Cable, 7m (23ft)

This HT cable matches the SFP+ to SFP+-10G-ACC-7M23FT requirement for multi-vendor equipment. The 7m (23ft) assembly supports 10G operation and provides an actively conditioned copper link for the stated high-speed interface; its complete electrical and mechanical details are listed below.

OEM Part Number: SFP+ to SFP+-10G-ACC-7M23FTHT Part Number: SFP+ to SFP+-10G-ACC-7M23FT

Product Highlights

• HT-manufactured ACC assembly in 7m (23ft)
• 10G connectivity at 10Gbps
• Interface configuration: SFP+ to SFP+
• Fixed length and part number: 7m (23ft), SFP+ to SFP+-10G-ACC-7M23FT
• Cable construction: Active Twinax
• Conductor specification: 26AWG
• Maximum power consumption: ≤0.5W
• Minimum bend radius: 30mm

The rated power consumption is ≤0.5W. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

The extended 7m (23ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated ACC construction avoids a chain of separate modules and patch leads.

SFP+ to SFP+-10G-ACC-7M23FT occupies the middle of this family between SFP+ to SFP+-10G-ACC-5M16FT at 5m (16ft) and SFP+ to SFP+-10G-ACC-10M33FT at 10m (33ft). It adds 2m over the shorter option for extra routing clearance, while the next longer version adds another 3m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

This assembly uses 26AWG conductors, PVC (OFNR) jacket, minimum bend radius 30mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include 1x InfiniBand QDR, DDR, SDR, 10 Gigabit Ethernet, Fibre Channel. Confirm that the host firmware and port configuration support the same operating mode.

The HT cable carries the compatibility configuration associated with SFP+ to SFP+-10G-ACC-7M23FT, while its mechanical assembly remains the fixed 7m (23ft) version described here. Incoming inspection, connector examination and a live link test are completed before packing. Customers with unusually old or new Generic software can request a pre-order check.

When ordering, specify SFP+ to SFP+-10G-ACC-7M23FT, cable length 7m (23ft) and the host platform. This allows our team to verify both the physical assembly and the compatibility requirement before production. Neutral labeling and customer packing lists can be arranged for volume orders.

Every SFP+ to SFP+-10G-ACC-7M23FT compatible assembly undergoes link testing, compatibility verification and visual inspection. The 7m (23ft) cable is coiled without exceeding its minimum bend radius, fitted with connector protection and packed in an anti-static bag or protective tray before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.