SFP to SFP-High-Speed-DAC-5M16FT 1G SFP Passive Copper Twinax Cable, 5m (16ft)

Designed for hosts that recognize SFP to SFP-High-Speed-DAC-5M16FT, this SFP to SFP cable delivers High-Speed transmission over a fixed 5m (16ft) assembly. Its DAC construction provides a factory-terminated passive copper link without separate optical modules or patch cords.

OEM Part Number: SFP to SFP-High-Speed-DAC-5M16FTHT Part Number: SFP to SFP-High-Speed-DAC-5M16FT

Product Highlights

• HT-manufactured DAC assembly in 5m (16ft)
• High-Speed connectivity at 1Gbps
• Interface configuration: SFP to SFP
• Fixed length and part number: 5m (16ft), SFP to SFP-High-Speed-DAC-5M16FT
• Cable construction: Passive Twinax
• Conductor specification: 26AWG
• Maximum power consumption: ≤0.1W
• Minimum bend radius: 23mm

The rated power consumption is ≤0.1W. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

SFP to SFP-High-Speed-DAC-5M16FT occupies the middle of this family between SFP to SFP-High-Speed-DAC-3M10FT at 3m (10ft) and SFP to SFP-High-Speed-DAC-7M23FT at 7m (23ft). It adds 2m over the shorter option for extra routing clearance, while the next longer version adds another 2m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

This assembly uses 26AWG conductors, PVC (OFNR) jacket, minimum bend radius 23mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include 1G Ethernet. Confirm that the host firmware and port configuration support the same operating mode.

A passive DAC has no separate optical conversion stage. Its low-power, low-latency operation is useful for short equipment links, but the assembly must remain within the length and signaling mode accepted by both hosts.

The 5m (16ft) length gives SFP to SFP-High-Speed-DAC-5M16FT more freedom for adjacent-rack and row-end deployments. Longer copper runs need particular attention to routing weight and bend control; the DAC specification and host support must still match the intended link.

The HT cable carries the compatibility configuration associated with SFP to SFP-High-Speed-DAC-5M16FT, while its mechanical assembly remains the fixed 5m (16ft) version described here. Incoming inspection, connector examination and a live link test are completed before packing. Customers with unusually old or new Generic software can request a pre-order check.

Use part number SFP to SFP-High-Speed-DAC-5M16FT for the 5m (16ft) assembly. For mixed-length projects, list each required part number and quantity separately so that every cable can be tested and packed according to its intended installation.

HT inspects and tests every completed cable before it enters finished stock. Protective caps or covers are fitted where applicable, followed by anti-static or tray packaging and an outer carton. Custom labels can cross-reference the customer part number, SFP to SFP-High-Speed-DAC-5M16FT and the 5m (16ft) length for easier inventory control.

Lead time for ordinary configurations is normally one to three working days, while production quantities are confirmed with the order. We can arrange express courier or economy freight according to destination and carton volume, or hand the shipment to your appointed logistics provider.