Cisco SFP28-25G-AOC4M Compatible 25G SFP28 Active Optical Cable, 4m (13ft)

This 4m (13ft) AOC cable is built for Cisco equipment requiring the SFP28-25G-AOC4M interface. The 25Gbps link uses SFP28 to SFP28 and is supplied as one complete tested assembly.

OEM Part Number: SFP28-25G-AOC4MHT Part Number: SFP28-25G-AOC4M

Product Highlights

• Compatible alternative to Cisco SFP28-25G-AOC4M
• 25G connectivity at 25Gbps
• Interface configuration: SFP28 to SFP28
• Fixed length and part number: 4m (13ft), SFP28-25G-AOC4M
• Minimum bend radius: 30mm

This assembly uses OFNP jacket, minimum bend radius 30mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The optical engines and fiber are permanently integrated into this AOC. There are no detachable optical modules to clean or exchange. Handle the complete assembly by its connector housings and cable, and keep both ends matched to the same interface specification.

The 4m (13ft) length gives SFP28-25G-AOC4M more freedom for adjacent-rack and row-end deployments. The integrated optical assembly should be supported along its route without tight bends or connector pull loads; the AOC specification and host support must still match the intended link.

SFP28-25G-AOC4M occupies the middle of this family between SFP28-25G-AOC3M at 3m (10ft) and SFP28-25G-AOC5M at 5m (16ft). It adds 1m over the shorter option for extra routing clearance, while the next longer version adds another 1m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

The HT cable carries the compatibility configuration associated with SFP28-25G-AOC4M, while its mechanical assembly remains the fixed 4m (13ft) version described here. Incoming inspection, connector examination and a live link test are completed before packing. Customers with unusually old or new Cisco software can request a pre-order check.

This product is ordered as SFP28-25G-AOC4M in 4m (13ft). Include the equipment model and software release if you would like a pre-order compatibility review. Other lengths use different part numbers and should not be substituted into the same order line.

HT inspects and tests every completed cable before it enters finished stock. Protective caps or covers are fitted where applicable, followed by anti-static or tray packaging and an outer carton. Custom labels can cross-reference the customer part number, SFP28-25G-AOC4M and the 4m (13ft) length for easier inventory control.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.