SFP28 to SFP28-25G-ACC-9M29FT 25G SFP28 Active Copper Twinax Cable, 9m (29ft)

With a fixed 9m (29ft) cable and SFP28 to SFP28, the SFP28 to SFP28-25G-ACC-9M29FT compatible assembly simplifies 25G deployment. It is manufactured and tested by HT for multi-vendor equipment.

OEM Part Number: SFP28 to SFP28-25G-ACC-9M29FTHT Part Number: SFP28 to SFP28-25G-ACC-9M29FT

Product Highlights

• HT-manufactured ACC assembly in 9m (29ft)
• 25G connectivity at 25Gbps
• Interface configuration: SFP28 to SFP28
• Fixed length and part number: 9m (29ft), SFP28 to SFP28-25G-ACC-9M29FT
• Cable construction: Active Twinax
• Conductor specification: 26AWG
• Maximum power consumption: ≤0.5W
• Minimum bend radius: 28mm

The rated power consumption is ≤0.5W. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

SFP28 to SFP28-25G-ACC-9M29FT is the longest of 9 verified length options in this family. Compared with SFP28 to SFP28-25G-ACC-8M26FT at 8m (26ft), it provides 1m of additional reach for a longer vertical drop, a wider rack or an adjacent-cabinet route. Confirm that the complete path requires this length, because unused slack still needs supported, bend-safe storage.

This assembly uses 26AWG conductors, PVC (OFNR) jacket, minimum bend radius 28mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include IEEE 802.3, SFP28 MSA, SFF-8402. Confirm that the host firmware and port configuration support the same operating mode.

The extended 9m (29ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated ACC construction avoids a chain of separate modules and patch leads.

The assembly is configured for equipment that recognizes SFP28 to SFP28-25G-ACC-9M29FT. Before shipment, we inspect both connectors and verify identification, link establishment and electrical continuity, link stability and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the equipment model and software release for a pre-order compatibility review.

Use part number SFP28 to SFP28-25G-ACC-9M29FT for the 9m (29ft) assembly. For mixed-length projects, list each required part number and quantity separately so that every cable can be tested and packed according to its intended installation.

HT inspects and tests every completed cable before it enters finished stock. Protective caps or covers are fitted where applicable, followed by anti-static or tray packaging and an outer carton. Custom labels can cross-reference the customer part number, SFP28 to SFP28-25G-ACC-9M29FT and the 9m (29ft) length for easier inventory control.

Available stock is usually packed and handed to the carrier within one to three working days. Delivery can be arranged by international express, air cargo or sea freight, with tracking details supplied after dispatch. Freight-collect shipments and delivery to a customer warehouse or forwarder can also be coordinated.