SFP56-50G-ACC-3M10FT 50G SFP56 Active Copper Twinax Cable, 3m (10ft)

Use the SFP56-50G-ACC-3M10FT compatible assembly where a 50G connection is required between compatible ports. This page covers the 3m (10ft) version only, with its own HT part number, specifications and compatibility verification.

OEM Part Number: SFP56-50G-ACC-3M10FTHT Part Number: SFP56-50G-ACC-3M10FT

Product Highlights

• HT-manufactured ACC assembly in 3m (10ft)
• 50G connectivity at 50Gbps
• Interface configuration: SFP56
• Fixed length and part number: 3m (10ft), SFP56-50G-ACC-3M10FT
• Cable construction: Active Twinax
• Conductor specification: 30AWG
• Maximum power consumption: ≤0.5W
• Operating temperature: 0 to 70°C (32 to 158°F)

The rated power consumption is ≤0.5W. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

This assembly uses 30AWG conductors, PVC jacket. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

At 3m (10ft), this assembly can bridge non-aligned ports or adjacent racks while remaining a single direct-attach link. Support longer horizontal runs with suitable cable management and preserve space for cooling and future maintenance.

SFP56-50G-ACC-3M10FT occupies the middle of this family between SFP56-50G-ACC-2M7FT at 2m (7ft) and SFP56-50G-ACC-5M16FT at 5m (16ft). It adds 1m over the shorter option for extra routing clearance, while the next longer version adds another 2m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

The assembly is configured for equipment that recognizes SFP56-50G-ACC-3M10FT. Before shipment, we inspect both connectors and verify identification, link establishment and electrical continuity, link stability and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the equipment model and software release for a pre-order compatibility review.

Quote HT part number SFP56-50G-ACC-3M10FT with the required quantity. The 3m (10ft) length is fixed for this part number; if a different length is needed, select its corresponding page and OEM reference from the length list above. Standard HT labels and project-specific packaging are available.

Before packing, our team checks the cable jacket, connector boots, latches and identification of each assembly. The cable is then secured in a loose coil and protected against dust and connector impact. Neutral packaging, customer part-number labels and project-specific carton lists can be supplied on request.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.