SFP56-50G-AOC-30M98FT 50G SFP56 Active Optical Cable, 30m (98ft)

The HT-manufactured SFP56-50G-AOC-30M98FT compatible cable provides 50G connectivity for multi-vendor equipment. This 30m (98ft) version is a factory-terminated active optical link with the optical engines and fiber integrated into the assembly, with an exact part number and length that can be matched directly to the equipment requirement.

OEM Part Number: SFP56-50G-AOC-30M98FTHT Part Number: SFP56-50G-AOC-30M98FT

Product Highlights

• HT-manufactured AOC assembly in 30m (98ft)
• 50G connectivity at 50Gbps
• Interface configuration: SFP56
• Fixed length and part number: 30m (98ft), SFP56-50G-AOC-30M98FT
• Cable construction: Optical Cable
• Maximum power consumption: ≤2W
• Minimum bend radius: 60mm

The listed modulation format is PAM4. Both host interfaces must be configured for the same aggregate rate and lane arrangement. A connector that fits mechanically does not by itself guarantee that the remote port supports this encoding or breakout mode.

The extended 30m (98ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated AOC construction avoids a chain of separate modules and patch leads.

SFP56-50G-AOC-30M98FT occupies the middle of this family between SFP56-50G-AOC-25M82FT at 25m (82ft) and SFP56-50G-AOC-50M164FT at 50m (164ft). It adds 5m over the shorter option for extra routing clearance, while the next longer version adds another 20m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

The rated power consumption is ≤2W. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

This assembly uses OFNP jacket, minimum bend radius 60mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The optical engines and fiber are permanently integrated into this AOC. There are no detachable optical modules to clean or exchange. Handle the complete assembly by its connector housings and cable, and keep both ends matched to the same interface specification.

The HT cable carries the compatibility configuration associated with SFP56-50G-AOC-30M98FT, while its mechanical assembly remains the fixed 30m (98ft) version described here. Incoming inspection, connector examination and a live link test are completed before packing. Customers with unusually old or new Generic software can request a pre-order check.

Quote HT part number SFP56-50G-AOC-30M98FT with the required quantity. The 30m (98ft) length is fixed for this part number; if a different length is needed, select its corresponding page and OEM reference from the length list above. Standard HT labels and project-specific packaging are available.

HT inspects and tests every completed cable before it enters finished stock. Protective caps or covers are fitted where applicable, followed by anti-static or tray packaging and an outer carton. Custom labels can cross-reference the customer part number, SFP56-50G-AOC-30M98FT and the 30m (98ft) length for easier inventory control.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.