SFP56 to SFP56-50G-DAC-3M10FT 50G SFP56 Passive Copper Twinax Cable, 3m (10ft)

This 3m (10ft) DAC cable is built for multi-vendor equipment requiring the SFP56 to SFP56-50G-DAC-3M10FT interface. The 50Gbps link uses SFP56 to SFP56 and is supplied as one complete tested assembly.

OEM Part Number: SFP56 to SFP56-50G-DAC-3M10FTHT Part Number: SFP56 to SFP56-50G-DAC-3M10FT

Product Highlights

• HT-manufactured DAC assembly in 3m (10ft)
• 50G connectivity at 50Gbps
• Interface configuration: SFP56 to SFP56
• Fixed length and part number: 3m (10ft), SFP56 to SFP56-50G-DAC-3M10FT
• Cable construction: Passive Twinax
• Conductor specification: 26AWG
• Maximum power consumption: ＜0.1W

The rated power consumption is ＜0.1W. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

A passive DAC has no separate optical conversion stage. Its low-power, low-latency operation is useful for short equipment links, but the assembly must remain within the length and signaling mode accepted by both hosts.

At 3m (10ft), this assembly can bridge non-aligned ports or adjacent racks while remaining a single direct-attach link. Support longer horizontal runs with suitable cable management and preserve space for cooling and future maintenance.

SFP56 to SFP56-50G-DAC-3M10FT is the longest of 3 verified length options in this family. Compared with SFP56 to SFP56-50G-DAC-2M7FT at 2m (7ft), it provides 1m of additional reach for a longer vertical drop, a wider rack or an adjacent-cabinet route. Confirm that the complete path requires this length, because unused slack still needs supported, bend-safe storage.

This assembly uses 26AWG conductors, PVC jacket. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is 50G Ethernet.

Our compatibility setup for Generic SFP56 to SFP56-50G-DAC-3M10FT is checked together with the physical 3m (10ft) assembly. Factory verification covers connector condition, host identification, error-free link establishment and electrical continuity, link stability and diagnostic readouts. Providing the exact host model and firmware release helps us identify platform-specific requirements before production.

When ordering, specify SFP56 to SFP56-50G-DAC-3M10FT, cable length 3m (10ft) and the host platform. This allows our team to verify both the physical assembly and the compatibility requirement before production. Neutral labeling and customer packing lists can be arranged for volume orders.

Quality control includes connector appearance, cable identification and functional verification. Packing materials are selected to keep the connector housings and cable boots from taking impact during transport, and the coil is not compressed into an undersized bundle. Volume orders can include customer-specific labels and packing documentation.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.