MTP-12 to MTP-12 APC Jumper, 8 Fibers, OM3, Type B

Our MTP® Elite Female jumper uses OM3 50/125µm fiber and Dual Rated (OFNR/LSZH) jacket to deliver a clean, repeatable connection between patch panels, cassettes and active equipment. 8 Fibers in one compact round cable keeps cable management simple even in dense installations.

Available lengths are 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft), 35m (115ft), 40m (131ft) and 50m (164ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.

Product Highlights

• MTP® Elite Female (Non-Pinned) to MTP® Elite Female (Non-Pinned), 8 Fibers
• OM3 50/125µm, bend insensitive fiber
• Insertion loss ≤0.35dB (0.15dB Typ.), return loss ≥45dB
• Type B polarity
• 3.0mm Dual Rated (OFNR/LSZH) round cable
• Minimum bend radius 7.5mm
• Stock lengths from 3m (10ft) to 50m (164ft), custom lengths on request

Typical applications for this jumper include patching between MPO cassettes and transceivers, connecting patch panels inside a cabinet, and structured links between adjacent racks. The 8-fiber version matches 400G and 800G parallel interfaces that run on 4 or 8 lanes, such as QSFP112, OSFP and twin-port OSFP connections. Type controlled factory wiring keeps the polarity scheme consistent with the rest of your cabling system.

The same jumper can be produced with different polarity and gender combinations. Male connectors carry guide pins for direct module connection, while female versions are used at panels. Polarity A, B and C are all standard for us, and our engineers can check your link diagram if you are unsure which one to order.

To order, quote 12FMTPOM3 together with the length and quantity you need. Private labeling, custom packaging and project specific documentation are all handled in-house.

Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.

Standard configurations normally ship within a few working days by DHL, UPS, FedEx, TNT or EMS. For project quantities we arrange air or sea freight, and we can ship on your own courier account or deliver to your appointed forwarder.

Our test routine covers insertion loss, return loss and ferrule end face inspection on every assembly. Because testing is done in-house, custom variants receive exactly the same verification as standard models.