Extreme Networks 40GB-AC07-QSFP Compatible 40G QSFP+ Active Copper Cable, 7m (23ft)

For short, high-density connections, this ACC cable combines 40G performance with a fixed 7m (23ft) cable run. It corresponds to Extreme Networks 40GB-AC07-QSFP and uses an actively conditioned copper link for the stated high-speed interface.

OEM Part Number: 40GB-AC07-QSFPHT Part Number: 40GB-AC07-QSFP

Product Highlights

• Compatible alternative to Extreme Networks 40GB-AC07-QSFP
• 40G connectivity at 40Gbps
• Interface configuration: QSFP+ to QSFP+
• Fixed length and part number: 7m (23ft), 40GB-AC07-QSFP
• Conductor specification: 26AWG
• Minimum bend radius: 37.5mm

This assembly uses 26AWG conductors, PVC (OFNR) jacket, minimum bend radius 37.5mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The extended 7m (23ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated ACC construction avoids a chain of separate modules and patch leads.

40GB-AC07-QSFP is the shortest of 2 verified length options in this family. It is the preferred choice when the port positions are close and cable slack must be kept to a minimum. The next option is 40GB-C10-QSFP at 10m (33ft), adding 3m for a less direct routing path; selecting it unnecessarily would leave more cable to dress.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include 40G InfiniBand 8x DDR, 4x QDR, 10G/40Gigabit Ethernet, Fibre Channel. Confirm that the host firmware and port configuration support the same operating mode.

Our compatibility setup for Extreme Networks 40GB-AC07-QSFP is checked together with the physical 7m (23ft) assembly. Factory verification covers connector condition, host identification, error-free link establishment and electrical continuity, link stability and diagnostic readouts. Providing the exact host model and firmware release helps us identify platform-specific requirements before production.

When ordering, specify 40GB-AC07-QSFP, cable length 7m (23ft) and the host platform. This allows our team to verify both the physical assembly and the compatibility requirement before production. Neutral labeling and customer packing lists can be arranged for volume orders.

Before packing, our team checks the cable jacket, connector boots, latches and identification of each assembly. The cable is then secured in a loose coil and protected against dust and connector impact. Neutral packaging, customer part-number labels and project-specific carton lists can be supplied on request.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.