Customized Duplex Uniboot Fiber Patch Cable, LC UPC, OS2

High-density designs should assess this item together with panel access, cable routing and the complete optical loss allowance. This custom fiber patch cable is built to the specific arrangement the project specifies: connector styles, polish, fiber mode, jacket and length are all selected at order time and this optical assembly is factory terminated and optically tested before dispatch.

Product Highlights

• Offered in Riser (OFNR)/LSZH Flame-retardant Jacket with 1.6/2.0mm Cable Diameters
• Available in Standard/Flat Clip and Push Pull Tabs Connector Types
• Uniboot Design Allows One Cable to Carry Two Fibers to Reduce the Cable Bulk When Routing
• Optical Performance Test for Normal Network Connections
• Compliant to ANSI/TIA-568-D.3

The custom program covers the combinations that stock lists cannot: mixed connector families, non-standard jackets, unusual lengths, marking and packaging to the project specification. This optical assembly is terminated and tested exactly like a stock product, with the arrangement confirmed before manufacturing begins.

Patch fields are rarely kind to fiber. Leads pathway through tight managers, sharp tray corners and crowded vertical channels. The bend-insensitive glass in this terminated assembly tolerates a 10mm fiber bend radius; consequently, a hurried routing decision during a night upkeep window will not by itself turn into a measurable penalty on the channel.

Single-mode patching carries the links that leave the room: campus backbones, carrier handoffs, long runs between buildings and every wavelength-multiplexed service. The OS2 glass in this terminated assembly is the corresponding class used in the outside plant; consequently, the completed jumper will not by itself become the weak point of the link loss budget. At 1310 and 1550nm the attenuation stays a fraction of a decibel per kilometer, and this connector interface pair adds less than 0.3dB when the end faces are clean and seated.

Standard cable lengths cover the common patching routes: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 30m (98ft), with custom length obtainable beyond the list. Specifying the measured pathway length keeps the slack out of the manager and the strain off these optical interfaces.

Each completed assembly is terminated with precision zirconia ferrule connectors and optically tested before packing: insertion loss and return loss are verified on each cable, and end-face geometry is inspected for consistent physical contact. This optical cable ships with dust caps on both connectors and the test result obtainable on ask for.

Refer to this arrangement by connector pair, fiber mode and length during the request for a quotation. For configurations outside the listed options, mixed connector families, jackets, marking or project packaging, send the requirement with the enquiry and the factory will review the build before manufacturing begins. Project orders can be reviewed for interface compatibility, packing details and delivery coordination.