Customized MTP-8 Jumper, 64-256F, Type B, OM4

A ready to install MTP® Elite Female jumper: 64/128/256 Fibers (Base-8), OM4 50/125µm, Plenum (OFNP)/Dual Rated (OFNR/LSZH). Pre-termination means no polishing, no epoxy and no curing time on site - just route the cable, plug in both ends and bring the link up.

Available lengths are 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.

Product Highlights

• MTP® Elite Female (Non-Pinned) to MTP® Elite Female (Non-Pinned), 64/128/256 Fibers (Base-8)
• OM4 50/125µm, bend insensitive fiber
• Insertion loss ≤0.35dB, return loss ≥45dB
• Type B polarity
• Plenum (OFNP)/Dual Rated (OFNR/LSZH)
• Minimum bend radius 7.5mm
• Stock lengths from 5m (16ft) to 30m (98ft), custom lengths on request

Typical applications for this jumper include patching between MPO cassettes and transceivers, connecting patch panels inside a cabinet, and structured links between adjacent racks. The 64/128/256 Fibers (Base-8) construction concentrates the equivalent of many duplex jumpers into a single assembly, which is exactly what high density spine and leaf cabling needs. Type controlled factory wiring keeps the polarity scheme consistent with the rest of your cabling system.

This model is supplied in the polarity shown in the specification table. Type A maps fiber 1 to fiber 1 straight through, Type B reverses the array, and Type C swaps adjacent pairs. Female (pinless) connectors mate with panels and cassettes; male (pinned) versions are available for direct transceiver connection. Tell us your cabling scheme and we will build the matching variant.

To order, quote XXMTPOM4 together with the length and quantity you need. Private labeling, custom packaging and project specific documentation are all handled in-house.

We have manufactured fiber optic assemblies since 1995. MPO and MTP cabling is one of our core lines: fiber counts from 8 to 144, single mode and multimode, UPC and APC polish, trunk, jumper, harness and breakout formats. Send your drawing and we turn it into a ready to install assembly.

Our test routine covers insertion loss, return loss and ferrule end face inspection on every assembly. Because testing is done in-house, custom variants receive exactly the same verification as standard models.

Most orders leave our facility within a few working days. Courier, air freight and sea freight are all available, and we are happy to hand goods to your nominated forwarder in China.