Fortinet FN-CABLE-QSFP28-4SFP28-2.5 Compatible 100G QSFP28 4 x 25G NRZ to 4 x 25G SFP28 NRZ Passive Copper Breakout Cable, 2.5m (8ft)

The FN-CABLE-QSFP28-4SFP28-2.5 cable offers a direct QSFP28 to SFP28 connection at 100Gbps. Its 2.5m (8ft) length and DAC construction are intended for Fortinet equipment, with no separate transceiver-and-patch-cord assembly required.

OEM Part Number: FN-CABLE-QSFP28-4SFP28-2.5HT Part Number: FN-CABLE-QSFP28-4SFP28-2.5

Product Highlights

• Compatible alternative to Fortinet FN-CABLE-QSFP28-4SFP28-2.5
• 100G connectivity at 100Gbps
• Interface configuration: QSFP28 to SFP28
• Fixed length and part number: 2.5m (8ft), FN-CABLE-QSFP28-4SFP28-2.5
• Cable construction: Passive Twinax
• Conductor specification: 30AWG
• Maximum power consumption: ≤0.125W
• Minimum bend radius: 60mm

The listed modulation format is QSFP28-4x 25G-NRZ SFP28-1x 25G-NRZ. Both host interfaces must be configured for the same aggregate rate and lane arrangement. A connector that fits mechanically does not by itself guarantee that the remote port supports this encoding or breakout mode.

FN-CABLE-QSFP28-4SFP28-2.5 occupies the middle of this family between FN-CABLE-QSFP28-4SFP28-2 at 2m (7ft) and FN-CABLE-QSFP28-4SFP28-3 at 3m (10ft). It adds 0.5m over the shorter option for extra routing clearance, while the next longer version adds another 0.5m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

The rated power consumption is ≤0.125W. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

This assembly uses 30AWG conductors, PVC (OFNR) jacket, minimum bend radius 60mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is 100G to 4x 25G Ethernet, Data Centers. Listed interface and protocol references include IEEE 802.3, QSFP28 MSA, SFF-8665. Confirm that the host firmware and port configuration support the same operating mode.

The QSFP28 to SFP28 configuration divides the high-speed interface into multiple lower-speed connections. Verify the upstream lane assignment, downstream port speeds and breakout setting on the host before connecting the assembly. Each branch must attach to the correct remote interface.

A passive DAC has no separate optical conversion stage. Its low-power, low-latency operation is useful for short equipment links, but the assembly must remain within the length and signaling mode accepted by both hosts.

The 2.5m (8ft) version is useful when a two-metre run would leave insufficient working slack. Before installation, check the complete horizontal and vertical path so that FN-CABLE-QSFP28-4SFP28-2.5 reaches both ports without tension at either connector.

The HT cable carries the compatibility configuration associated with FN-CABLE-QSFP28-4SFP28-2.5, while its mechanical assembly remains the fixed 2.5m (8ft) version described here. Incoming inspection, connector examination and a live link test are completed before packing. Customers with unusually old or new Fortinet software can request a pre-order check.

This product is ordered as FN-CABLE-QSFP28-4SFP28-2.5 in 2.5m (8ft). Include the equipment model and software release if you would like a pre-order compatibility review. Other lengths use different part numbers and should not be substituted into the same order line.

Production inspection covers both physical condition and a live link check. Connector ends receive individual protection, and the completed assembly is packed without tight ties or sharp bends. For multi-length projects, cartons can be separated and labelled by OEM part number to simplify installation on site.

Lead time for ordinary configurations is normally one to three working days, while production quantities are confirmed with the order. We can arrange express courier or economy freight according to destination and carton volume, or hand the shipment to your appointed logistics provider.