Dell (Force10) CBL-10GSFP-AOC-15M Compatible 10G SFP+ Active Optical Cable, 15m (49ft)

With a fixed 15m (49ft) cable and SFP+ to SFP+, the (Force10) CBL-10GSFP-AOC-15M compatible assembly simplifies 10G deployment. It is manufactured and tested by HT for Dell equipment.

OEM Part Number: (Force10) CBL-10GSFP-AOC-15MHT Part Number: (Force10) CBL-10GSFP-AOC-15M

Product Highlights

• Compatible alternative to Dell (Force10) CBL-10GSFP-AOC-15M
• 10G connectivity at 10Gbps
• Interface configuration: SFP+ to SFP+
• Fixed length and part number: 15m (49ft), (Force10) CBL-10GSFP-AOC-15M
• Cable construction: OM3
• Maximum power consumption: <0.8W
• Minimum bend radius: 30mm

The rated power consumption is <0.8W. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

This assembly uses OFNP jacket, minimum bend radius 30mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include SFF-8636, 1xInfiniBand QDR,DDR,SDR, 10G Gigabit Ethernet. Confirm that the host firmware and port configuration support the same operating mode.

The optical engines and fiber are permanently integrated into this AOC. There are no detachable optical modules to clean or exchange. Handle the complete assembly by its connector housings and cable, and keep both ends matched to the same interface specification.

The extended 15m (49ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated AOC construction avoids a chain of separate modules and patch leads.

(Force10) CBL-10GSFP-AOC-15M occupies the middle of this family between (Force10) CBL-10GSFP-AOC-10M at 10m (33ft) and (Force10) CBL-10GSFP-AOC-20M at 20m (66ft). It adds 5m over the shorter option for extra routing clearance, while the next longer version adds another 5m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

Compatibility is more than matching the SFP+ to SFP+ shape. This assembly is prepared for hosts expecting (Force10) CBL-10GSFP-AOC-15M and is checked for identification, stable link behavior and optical link operation, receive activity and diagnostic readouts. We recommend confirming the equipment model and software release for critical deployments or mixed-vendor installations.

This product is ordered as (Force10) CBL-10GSFP-AOC-15M in 15m (49ft). Include the equipment model and software release if you would like a pre-order compatibility review. Other lengths use different part numbers and should not be substituted into the same order line.

Every (Force10) CBL-10GSFP-AOC-15M compatible assembly undergoes link testing, compatibility verification and visual inspection. The 15m (49ft) cable is coiled without exceeding its minimum bend radius, fitted with connector protection and packed in an anti-static bag or protective tray before cartoning. Project labels and packing lists are available for volume orders.

Lead time for ordinary configurations is normally one to three working days, while production quantities are confirmed with the order. We can arrange express courier or economy freight according to destination and carton volume, or hand the shipment to your appointed logistics provider.