Dell (Force10) CBL-10GSFP-DAC-5M Compatible 10G SFP+ Passive Copper Twinax Cable, 5m (16ft)

This 5m (16ft) DAC cable is built for Dell equipment requiring the (Force10) CBL-10GSFP-DAC-5M interface. The 10Gbps link uses SFP+ to SFP+ and is supplied as one complete tested assembly.

OEM Part Number: (Force10) CBL-10GSFP-DAC-5MHT Part Number: (Force10) CBL-10GSFP-DAC-5M

Product Highlights

• Compatible alternative to Dell (Force10) CBL-10GSFP-DAC-5M
• 10G connectivity at 10Gbps
• Interface configuration: SFP+ to SFP+
• Fixed length and part number: 5m (16ft), (Force10) CBL-10GSFP-DAC-5M
• Cable construction: Passive Twinax
• Conductor specification: 24AWG
• Maximum power consumption: ≤0.1W
• Minimum bend radius: 30mm

The rated power consumption is ≤0.1W. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

The 5m (16ft) length gives (Force10) CBL-10GSFP-DAC-5M more freedom for adjacent-rack and row-end deployments. Longer copper runs need particular attention to routing weight and bend control; the DAC specification and host support must still match the intended link.

(Force10) CBL-10GSFP-DAC-5M occupies the middle of this family between (Force10) CBL-10GSFP-DAC-4M at 4m (13ft) and (Force10) CBL-10GSFP-DAC-6M at 6m (20ft). It adds 1m over the shorter option for extra routing clearance, while the next longer version adds another 1m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

This assembly uses 24AWG conductors, PVC (OFNR) jacket, minimum bend radius 30mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is 10G Ethernet. Listed interface and protocol references include 1x InfiniBand QDR, DDR, SDR, 10 Gigabit Ethernet, Fibre Channel. Confirm that the host firmware and port configuration support the same operating mode.

A passive DAC has no separate optical conversion stage. Its low-power, low-latency operation is useful for short equipment links, but the assembly must remain within the length and signaling mode accepted by both hosts.

The HT cable carries the compatibility configuration associated with (Force10) CBL-10GSFP-DAC-5M, while its mechanical assembly remains the fixed 5m (16ft) version described here. Incoming inspection, connector examination and a live link test are completed before packing. Customers with unusually old or new Dell software can request a pre-order check.

Use part number (Force10) CBL-10GSFP-DAC-5M for the 5m (16ft) assembly. For mixed-length projects, list each required part number and quantity separately so that every cable can be tested and packed according to its intended installation.

HT inspects and tests every completed cable before it enters finished stock. Protective caps or covers are fitted where applicable, followed by anti-static or tray packaging and an outer carton. Custom labels can cross-reference the customer part number, (Force10) CBL-10GSFP-DAC-5M and the 5m (16ft) length for easier inventory control.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.