Juniper Networks JNP-SFP-25G-DAC-1.5M Compatible 25G SFP28 Passive Copper Twinax Cable, 1.5m (5ft)

Use the JNP-SFP-25G-DAC-1.5M compatible assembly where a 25G connection is required between compatible ports. This page covers the 1.5m (5ft) version only, with its own HT part number, specifications and compatibility verification.

OEM Part Number: JNP-SFP-25G-DAC-1.5MHT Part Number: JNP-SFP-25G-DAC-1.5M

Product Highlights

• Compatible alternative to Juniper Networks JNP-SFP-25G-DAC-1.5M
• 25G connectivity at 25Gbps
• Interface configuration: SFP28 to SFP28
• Fixed length and part number: 1.5m (5ft), JNP-SFP-25G-DAC-1.5M
• Conductor specification: 30AWG
• Minimum bend radius: 21.25mm

Juniper platform documentation distinguishes straight QSFP28 DAC or AOC connections from DACBO and AOCBO breakout operation. On channelized systems, the host port must be configured for the required breakout mode. Match this HT compatible cable to the exact Juniper part number and the intended platform configuration.

The intended application is 25G Ethernet, Data Center, 5G Wireless. Listed interface and protocol references include IEEE 802.3, SFP28 MSA, SFF-8402, Infiniband, EIA 364-1000. Confirm that the host firmware and port configuration support the same operating mode.

A passive DAC has no separate optical conversion stage. Its low-power, low-latency operation is useful for short equipment links, but the assembly must remain within the length and signaling mode accepted by both hosts.

The additional half metre beyond a one-metre assembly gives JNP-SFP-25G-DAC-1.5M useful routing flexibility when the ports are not directly aligned. It can accommodate a different rack unit or a short service loop, but excess cable should be dressed loosely rather than folded into a tight coil.

JNP-SFP-25G-DAC-1.5M occupies the middle of this family between JNP-SFP-25G-DAC-1M at 1m (3ft) and JNP-SFP-25G-DAC-2M at 2m (7ft). It adds 0.5m over the shorter option for extra routing clearance, while the next longer version adds another 0.5m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

This assembly uses 30AWG conductors, PVC (OFNR) jacket, minimum bend radius 21.25mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

Our compatibility setup for Juniper Networks JNP-SFP-25G-DAC-1.5M is checked together with the physical 1.5m (5ft) assembly. Factory verification covers connector condition, host identification, error-free link establishment and electrical continuity, link stability and diagnostic readouts. Providing the exact host model and firmware release helps us identify platform-specific requirements before production.

Quote HT part number JNP-SFP-25G-DAC-1.5M with the required quantity. The 1.5m (5ft) length is fixed for this part number; if a different length is needed, select its corresponding page and OEM reference from the length list above. Standard HT labels and project-specific packaging are available.

HT inspects and tests every completed cable before it enters finished stock. Protective caps or covers are fitted where applicable, followed by anti-static or tray packaging and an outer carton. Custom labels can cross-reference the customer part number, JNP-SFP-25G-DAC-1.5M and the 1.5m (5ft) length for easier inventory control.

Stock items are generally dispatched within one to three working days after order confirmation. DHL, UPS, FedEx, TNT and EMS are available for international delivery; larger consolidated orders can move by air or sea freight. Customer courier accounts and nominated forwarders are accepted.