LC UPC to SC UPC Duplex OM3 Fiber Patch Cable

Selection starts with the actual optical interface and ends with verification of the delivered configuration. This OM3 fiber patch cable carries a LC UPC interface on one end and a SC UPC interface on the other, factory terminated on OM3 glass and optically tested as an entire product. The duplex zipcord structure keeps the transmit and receive strands paired in one product for fast, error-free patching.

Product Highlights

• Bend Insensitive Fiber with 7.5mm Min. Bend Radius
• Precision Zirconia Ferrule Connectors Ensure Low Loss
• Flame-Retardant Riser (OFNR) for Vertical and Floor-to-Floor Installations
• Color-Coded Cable Jacket for Easy Identification
• Duplex Zipcord Construction Reduces Risk of Damage from Crimping

Multimode links fail more commonly from contamination than from fiber damage. Every ferrule should be inspected and cleaned before final connection, and the dust caps should stay on until the moment of link. These habits matter more than any specification on the datasheet.

This OM3 product matches the existing base of OM3 path cabling: 10G links to 300 meters and 40/100G SR4 links to 70 meters. When the permanent channel is OM3, patching with OM3 keeps the path specification homogeneous and the test reports clean.

Regular length versions cover the common patching routes: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), with custom-built length provided beyond the list. Specifying the measured pathway length keeps the slack out of the manager and the strain off the connection interfaces.

Each optical assembly is terminated with precision zirconia ferrule connectors and optically tested before packing: insertion loss and return loss are verified on each cable, and end-face geometry is inspected for consistent physical contact. The relevant cable ships with dust caps on both connectors and the test result provided on ask for.

Refer to this arrangement by connector pair, fiber mode and length when requisitioning a quotation. For configurations outside the listed options, mixed connector families, jackets, marking or project packaging, send the need with the inquiry and the factory will cross-check the build before production is released. Huihong Technologies can review the selection and customization details before confirming supply.