Cisco OSFP-800G-OFLPC Compatible 800G OSFP 8 x 100G PAM4 IHS/Finned Top to OSFP 8 x 100G PAM4 RHS/Flat Top Passive Copper Twinax Cable

Use this DAC cable where a 800G link is required between compatible OSFP (IHS/Finned Top) to OSFP (RHS/Flat Top) ports. This HT version corresponds to Cisco OSFP-800G-OFLPC and covers 0.5m (2ft) and 2m (7ft); electrical or optical construction follows the DAC specification rather than a detachable transceiver-and-patch-cord arrangement.

Series Part Number: OSFP-800G-OFLPCHT Part Number: OSFP-800G-OFLPC

Product Highlights

• HT-manufactured compatible alternative for Cisco OSFP-800G-OFLPC
• 800G aggregate connectivity at 800Gbps
• Interface configuration: OSFP (IHS/Finned Top) to OSFP (RHS/Flat Top)
• Passive DAC / Copper
• Length configurations covered: 0.5m (2ft) and 2m (7ft)
• Conductor specification: 30AWG
• Power consumption: 0.1W Per End
• Operating temperature: 0 to 70°C (32 to 158°F)

This series page covers the following verified source length configurations: 0.5m (2ft) and 2m (7ft). Each documented length-specific OEM reference is treated as its own product configuration; follow the corresponding product link where available. Select the required length when requesting a quotation; custom project lengths are available for discussion.

• OSFP-800G-OFLPC005

Passive DAC assemblies are normally used for short switch-to-switch, switch-to-server and rack-adjacent links. They draw very little power and avoid separate optical components, but the selected length must remain within the host and cable specification.

The OSFP (IHS/Finned Top) to OSFP (RHS/Flat Top) interface and 800G data rate must match the equipment at both ends. The source application is listed as 800G Ethernet. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

The assembly is configured for equipment that recognizes the OSFP-800G-OFLPC series. Before shipment, we check connector identification, link establishment and electrical link stability, signal integrity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

When ordering, specify OSFP-800G-OFLPC, the host platform and one of the covered configurations: 0.5m (2ft) and 2m (7ft). If your purchase documentation uses any of the listed OEM part numbers, include that identifier as well so our team can verify the intended version before production.

Every DAC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.