QSFP56 to QSFP56-200G-ACC-3M10FT 200G QSFP56 4 x 50G PAM4 Active Copper Twinax Cable, 3m (10ft)

Designed for hosts that recognize QSFP56 to QSFP56-200G-ACC-3M10FT, this QSFP56 to QSFP56 cable delivers 200G transmission over a fixed 3m (10ft) assembly. Its ACC construction provides an actively conditioned copper link for the stated high-speed interface.

OEM Part Number: QSFP56 to QSFP56-200G-ACC-3M10FTHT Part Number: QSFP56 to QSFP56-200G-ACC-3M10FT

Product Highlights

• HT-manufactured ACC assembly in 3m (10ft)
• 200G connectivity at 200Gbps
• Interface configuration: QSFP56 to QSFP56
• Fixed length and part number: 3m (10ft), QSFP56 to QSFP56-200G-ACC-3M10FT
• Cable construction: Active Twinax
• Conductor specification: 30AWG
• Maximum power consumption: 1.5W Per End
• Minimum bend radius: 33mm

The rated power consumption is 1.5W Per End. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

At 3m (10ft), this assembly can bridge non-aligned ports or adjacent racks while remaining a single direct-attach link. Support longer horizontal runs with suitable cable management and preserve space for cooling and future maintenance.

QSFP56 to QSFP56-200G-ACC-3M10FT is the shortest of 4 verified length options in this family. It is the preferred choice when the port positions are close and cable slack must be kept to a minimum. The next option is QSFP56 to QSFP56-200G-ACC-4M13FT at 4m (13ft), adding 1m for a less direct routing path; selecting it unnecessarily would leave more cable to dress.

This assembly uses 30AWG conductors, PVC (OFNR) jacket, minimum bend radius 33mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include IEEE 802.3cd, SFF-8665, SFF-8679, SFF-8636. Confirm that the host firmware and port configuration support the same operating mode.

The assembly is configured for equipment that recognizes QSFP56 to QSFP56-200G-ACC-3M10FT. Before shipment, we inspect both connectors and verify identification, link establishment and electrical continuity, link stability and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the equipment model and software release for a pre-order compatibility review.

Use part number QSFP56 to QSFP56-200G-ACC-3M10FT for the 3m (10ft) assembly. For mixed-length projects, list each required part number and quantity separately so that every cable can be tested and packed according to its intended installation.

HT inspects and tests every completed cable before it enters finished stock. Protective caps or covers are fitted where applicable, followed by anti-static or tray packaging and an outer carton. Custom labels can cross-reference the customer part number, QSFP56 to QSFP56-200G-ACC-3M10FT and the 3m (10ft) length for easier inventory control.

Lead time for ordinary configurations is normally one to three working days, while production quantities are confirmed with the order. We can arrange express courier or economy freight according to destination and carton volume, or hand the shipment to your appointed logistics provider.