Dell (Force10) CBL-10GSFP-DAC-4M Compatible 10G SFP+ Passive Copper Twinax Cable, 4m (13ft)

Use the (Force10) CBL-10GSFP-DAC-4M compatible assembly where a 10G connection is required between compatible ports. This page covers the 4m (13ft) version only, with its own HT part number, specifications and compatibility verification.

OEM Part Number: (Force10) CBL-10GSFP-DAC-4MHT Part Number: (Force10) CBL-10GSFP-DAC-4M

Product Highlights

• Compatible alternative to Dell (Force10) CBL-10GSFP-DAC-4M
• 10G connectivity at 10Gbps
• Interface configuration: SFP+ to SFP+
• Fixed length and part number: 4m (13ft), (Force10) CBL-10GSFP-DAC-4M
• Cable construction: Passive Twinax
• Conductor specification: 24AWG
• Maximum power consumption: ≤0.1W
• Minimum bend radius: 23mm

The rated power consumption is ≤0.1W. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

The intended application is 10G Ethernet. Listed interface and protocol references include 1x InfiniBand QDR, DDR, SDR, 10 Gigabit Ethernet, Fibre Channel. Confirm that the host firmware and port configuration support the same operating mode.

A passive DAC has no separate optical conversion stage. Its low-power, low-latency operation is useful for short equipment links, but the assembly must remain within the length and signaling mode accepted by both hosts.

The 4m (13ft) length gives (Force10) CBL-10GSFP-DAC-4M more freedom for adjacent-rack and row-end deployments. Longer copper runs need particular attention to routing weight and bend control; the DAC specification and host support must still match the intended link.

(Force10) CBL-10GSFP-DAC-4M occupies the middle of this family between (Force10) CBL-10GSFP-DAC-3M at 3m (10ft) and (Force10) CBL-10GSFP-DAC-5M at 5m (16ft). It adds 1m over the shorter option for extra routing clearance, while the next longer version adds another 1m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

This assembly uses 24AWG conductors, PVC (OFNR) jacket, minimum bend radius 23mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

Compatibility is more than matching the SFP+ to SFP+ shape. This assembly is prepared for hosts expecting (Force10) CBL-10GSFP-DAC-4M and is checked for identification, stable link behavior and electrical continuity, link stability and diagnostic readouts. We recommend confirming the equipment model and software release for critical deployments or mixed-vendor installations.

When ordering, specify (Force10) CBL-10GSFP-DAC-4M, cable length 4m (13ft) and the host platform. This allows our team to verify both the physical assembly and the compatibility requirement before production. Neutral labeling and customer packing lists can be arranged for volume orders.

HT inspects and tests every completed cable before it enters finished stock. Protective caps or covers are fitted where applicable, followed by anti-static or tray packaging and an outer carton. Custom labels can cross-reference the customer part number, (Force10) CBL-10GSFP-DAC-4M and the 4m (13ft) length for easier inventory control.

Lead time for ordinary configurations is normally one to three working days, while production quantities are confirmed with the order. We can arrange express courier or economy freight according to destination and carton volume, or hand the shipment to your appointed logistics provider.