MMC Jumpers

MMC jumpers provide short, factory-terminated connections between high-density multi-fiber interfaces. This category includes MMC-to-MMC cords for consistent VSFF channels and MMC-to-MTP versions for transitions to established MTP infrastructure, with sixteen or twenty-four fibers in OS2 or OM4.

Choose by interface before choosing by color

Start with the connector at each end, then confirm gender, guide pins, fiber count and polish. MMC-to-MTP cords solve a form-factor transition but do not change gender or automatically correct polarity. The 24-fiber APC-to-UPC model is particularly distinct from its APC-to-APC counterpart and should be ordered only when the channel requires that combination.

OS2 and OM4 serve different channel designs

OS2 jumpers use single-mode G.657.A1 glass and are specified at 1310/1550nm. OM4 versions use bend-insensitive multimode fiber at 850/1300nm. Connector return-loss values also differ by model. Match the fiber to the active optics and include every mated pair in the loss budget instead of treating all short jumpers as equivalent.

Length and installation planning

The standard jumper lengths listed on the product pages are 1m (3ft), 2m (7ft) and 3m (10ft), with custom meter and foot lengths available. Select a route that avoids both tension and excess coils. Maintain the specified bend radius, inspect every ferrule and verify jumper polarity against the complete channel before installation.

Products in this Category

MMC-16 to MMC-16 APC Jumper, 16 Fibers, OS2
MMC Female to MMC Female, OS2 9/125µm, 16 Fibers.

MMC-16 to MMC-16 APC Jumper, 16 Fibers, OM4
MMC Female to MMC Female, OM4 50/125µm, 16 Fibers.

MMC-16 to MTP-16 APC Jumper, 16 Fibers, OS2
MMC Female to MTP® Female, OS2 9/125µm, 16 Fibers.

MMC-16 to MTP-16 APC Jumper, 16 Fibers, OM4
MMC Female to MTP® Female, OM4 50/125µm, 16 Fibers.

MMC-24 APC to MTP-24 UPC Jumper, 24 Fibers, OM4
MMC Female to MTP® Female, OM4 50/125µm, 24 Fibers.