MMC to MMC 1-Port Fiber Optic Adapter/Coupler without Flange

This one-port MMC-to-MMC adapter provides a single mating position in a compact green plastic body. The reduced-flange design measures 12.9 x 5.8 x 29.6mm and is intended for compatible MMC panel cut-outs. It offers a simple building block for custom faceplates, enclosures and low-count MMC patching positions.

Product Highlights

• Connector Type: MMC-MMC
• Body Style: 1-Port
• Color: Green
• Mounting Type: Reduced Flanged
• Body Material: Plastic
• Dimensions (HxWxD): 12.9x5.8x29.6mm

The one-port body is useful where only one MMC connection is required or where positions must be spaced individually across a faceplate. It avoids committing panel area to a multi-port block. Before fabrication, check the cut-out against the 5.8mm body width and 12.9mm height, and confirm that the reduced-flange mounting style matches the enclosure design.

The adapter aligns two MMC connectors but does not change connector gender, fiber count or polish. Verify that the two cable or device interfaces are intended to mate and that their guide-pin arrangement is correct. Use matching polish types and keep the position dust-capped when empty; an adapter cannot compensate for a contaminated or damaged ferrule.

Leave enough space in front of the adapter for the push-pull boot and enough space behind it for cable bend radius. A single connector in a dense panel can still be difficult to remove if adjacent cabling blocks the boot. Inspect and clean both MMC end faces before mating, and avoid using the adapter body as a cable support point.

Reference part number 24925 for the one-port reduced-flange adapter. Include quantity and, if it will be installed in a custom panel, provide the cut-out drawing or a sample panel requirement so mounting compatibility can be reviewed.