MMC-12/24 Connector One-Push Fiber Optic Cleaner

This one-push cleaner is designed for MMC-12 and MMC-24 connector end faces, covering PC, UPC and APC polish types. The disposable push-style tool advances dry cleaning material with each operation and is rated for at least 525 uses. It supports routine ferrule maintenance for multi-fiber panels, cable assemblies and test setups without liquid cleaner or replacement cartridges.

Product Highlights

• Cleaner Brand: US Conec IBC™
• Style: Push Style Port Cleaner
• Connector Type: MMC-12/24
• Polish Type: PC/UPC/APC
• Number of times: ≥ 525 times
• Use Type: Disposable

The cleaner addresses the specified MMC-12/24 connector formats, not the MMC-16 version covered by the separate tool. Confirm the connector model before use, especially in a panel containing several MMC variants. Proper cleaning removes dust and light contamination that can raise insertion loss or damage ferrules when connectors are mated under pressure.

Align the cleaner squarely with the port or connector and complete one firm push cycle. Then inspect the end face rather than assuming it is clean. If contamination remains, follow the equipment-compatible cleaning procedure and avoid improvising with unapproved swabs or solvents. Clean the mating connector as well, or debris can transfer back to the first ferrule.

Keep the cap fitted during storage and replace the disposable unit after its rated uses. Do not disassemble the advance mechanism or use the tool on live optical interfaces. Technicians should disable sources, inspect with a suitable microscope and dust-cap clean connectors until they are ready to be mated.

Use part number 25802 for the MMC-12/24 cleaner and specify quantity. If your toolkit also services MMC-16 connectors, include the separate MMC-16 cleaner in the order and label the two tools for quick identification.