MMC-16 Connector One-Push Fiber Optic Cleaner

The MMC-16 one-push cleaner is a disposable dry-cleaning tool for sixteen-fiber MMC connector end faces. Its push-style mechanism advances the cleaning material during each operation, supporting repeatable maintenance without solvents or refills. Rated for at least 525 uses, it is intended for PC, UPC and APC MMC-16 interfaces in installation, production and service environments.

Product Highlights

• Cleaner Brand: US Conec IBC™
• Style: Push Style Port Cleaner
• Connector Type: MMC-16
• Polish Type: PC/UPC/APC
• Number of times: ≥ 525 times
• Use Type: Disposable

A multi-fiber ferrule presents many optical paths in one end face, so a small contaminated area can affect more than one lane. The MMC-16 tool is shaped for that connector interface; a cleaner intended for another connector family should not be assumed to reach the same surfaces. Clean both sides of a mated pair before final insertion.

Remove the protective cap, align the tool with the connector or adapter port and press through one complete cleaning action. Do not twist the tool aggressively or repeat uncontrolled pumping. Inspect the ferrule with an appropriate microscope afterward. Heavy or hardened residue may require an approved wet-dry procedure rather than repeated dry cleaning alone.

Disable optical sources before cleaning and never look into an active fiber. Keep the cleaner capped when not in use and track its usage so the disposable tool is replaced after its rated service life. After inspection, mate the clean connector promptly or protect it with a dust cap to prevent recontamination.

Reference part number 25803 for the MMC-16 one-push cleaner and state quantity. For maintenance kits supporting several MMC formats, identify the required connector types so MMC-16 and MMC-12/24 tools are not mixed inadvertently.