10G OM4 50/125 MMF MTP MTP Fiber Optic Trunk Cable-10Gbps Network

We offer single mode and multimode MTP fiber optic patch cables, MTP-LC, MTP-ST, MTP-FC,MTP-MU,MTP-MT-RJ,MTP-E2000,etc types custom design MTP fiber optic cable assemblies, 9/125,50/125,62.5/125,SM,MM,simplex,duplex,multi cores.OS2,OS1,OM1,OM2,OM3,OM4,for 10G/40G/100G applications.

MTP/MTP fiber optic trunk cable are designed for high density application which offers excellent benefits in terms on-site installation time and space saving, ideal for data centers. They are used to interconnect cassettes, panels or ruggedised MTP/MTP fanouts, spanning MDA, HDA and EDA zones.

Our MTP/MTP trunks are factory pre-terminated, tested and packed along with the test reports, and they are built with highest quality coMTPnents.

Test Wavalength	850nm	Cable Structure	Colored fibers, Aramid Yarn, Jacket
Insertion Loss	less than 0.6dB or less than 0.35dB	Return Loss	more than 50dB
Durability	more than 200 times	Operating temperature	-40 to 80
Outer Jacket Color	Aqua	Standards Compliance	IEC-61754-7 & TIA-604-5(FOCIS-5)

MTP/MTP connectors have male and female design. Male connectors have two guide pins and female connectors do not.
Cable Difference - LSZH&Riser | Bunch&Ribbon
The MTP/MTP fiber optic trunk cables are designed with different cable jackets and cable structures according to customers' requirements.

LSZH cable has a special flame-retardant coating, flamed with low smokeand low toxicity, used between floors in a building. Bunch cable is with round shape and hard to break, can rotate for 360 degree.

Riszer cable resistant to oxidation and degradation, flamed with heavy black smoke, commonly used for horizontal runs from the wiring center. Ribbon cable is made of many wires runing parallel to each other on a flat plane, suitable for aerial lashed, duct, or direct buried applications.

Guidelines for Fiber Polarity - 12F and 24F
The three polarity methods A, B and C as defined in TIA-568-C, for their part, are used to guarantee the right bi-directional allocation.

Polarity	Key Position	Fiber Features	12 Fibers Laying	Application
Type A (straight through transmission)	Key up to Key down	Each fiber is in the same position on each end.	1 to 1...12 to 12	Typically for connecting FAPs and cassettes in 10Gbps networks
Type B(full flipped transmission)	Key up to Key up	The fiber is fully flipped on either end.	1 to 12...12 to 1	Connecting to QSFP+ /CFP / FAPs or cassettes in 10G to 40G/100G
Type C(pair flipped transmission)	Key up to Key down	Each adjacent pair of fibers at one end are flipped at the other end.	1 to 2...12 to 11	Typically used in CXP or Cassettes applications

Polarity	Key Position	Fiber Features	24 Fibers Laying	Application
Type A (straight through transmission)	Key up to Key down	Each fiber is in the same position on each end.	1 to 1...24 to 24	Typically for connecting FAPs and cassettes in 10Gbps networks
Type B(full flipped transmission)	Key up to Key up	The fiber is fully flipped on either end.	1 to 12...24 to 13	Connecting to QSFP+ /CFP / FAPs or cassettes in 10G to 40G/100G
Type C(pair flipped transmission)	Key up to Key down	Each adjacent pair of fibers at one end are flipped at the other end.	1 to 13...24 to 12	Typically used in CXP or Cassettes applications

High Quality MTP MTP Cable Guarantee
a.High-performance polishing machine, and complemented by precision plates holders designed for MT ferrules.
b.3D interferometer provides verification of MTP/MTP polishing process, and making all parameters of hte polished MT ferrule complies and exceeds industry standards.
c.The flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber count cable assemblies.