12 Fibers MPO Female to 6xLC Duplex 10G OM4 Multimode Staggered Harness Cable, 3.0mm Bunch LSZH Jacket, 10GbE and 40GbE Solution

We make single mode and multimode MPO fiber optic patch cables, harness, breakout,trunk, distribution,MPO-LC, MPO-ST, MPO-FC,MPO-MU,MPO-MT-RJ,MPO-E2000,etc types custom design MPO fiber optic cable assemblies, 9/125,50/125,62.5/125,SM,MM,simplex,duplex,multi cores.OS2,OS1,OM1,OM2,OM3,OM4,for 10G/40G/100G applications.

Connector A	MPO (Female)	Connector B	LC UPC (6)
Fibre Category	50μm MM (OM4)	Fibre Count	12
Fiber Type	Duplex	Wavelength	850nm
Cable Jacket	3.0mm LSZH-Magenta	Fan-Out Diameter	2.0mm
Insertion loss, max.	less than 0.6dB	Return Loss,min.	MPO more than 20dB, LC more than 30dB
Tensile strength	220 N	Durability	more than 500 times
Min. Bend Radius Installation	30 mm	Min. Bend Radius Operation	10 mm
Operating Temperature	0 to +50	Fiber Grade	G.651

Key Features and Applications

Allow seamless integration into the most common SAN directors Ensuring efficient use of horizontal and vertical rack pathways, improves the airflow Provide consistent quality, ensure system performance Compliant to IEC-61754-7 and TIA-604-5(FOCIS-5) standard

Storage Area Network(SAN) Local Area Network(LAN) Switch Parallel Processing Applications Equipment Distribution Area (EDA) Patch Field Applications

Guidelines for Fiber Polarity

Polarity	Key Position	Fiber Features	12 Fibers Laying	Application
Type A (straight through transmission)	Key up	Each fiber is in the same position on each end	1 to 1...12 to 12	Typically for connecting FAPs and cassettes in 10Gbps networks
Type B(full flipped transmission)	Key up	The fiber is fully flipped on either end	1 to 2 3 to 4...11 to 12	Connecting to QSFP+ /CFP / FAPs or cassettes in 10G to 40G/100G

We ensure the high quality of our MPO fiber optic patch cables:
1. we use High-performance polishing equipment, and complemented by precision plates holders designed for MT ferrules.
2. our 3D interferometer are used in verification of MPO polishing process, making all parameters of the polished MT ferrule complies and exceeds industry standards.
3.The flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber cores cable assemblies.