48 Fibers Single-Mode 12 Strands MTP Harness Cable 3.0mm LSZH/Riser

We offer single mode and multimode MTP fiber optic patch cables, MTP-LC, MTP-ST, MTP-FC,MTP-MU,MTP-MT-RJ,MTP-E2000,etc types custom design MTP fiber optic cable assemblies, 9/125,50/125,62.5/125,SM,MM,simplex,duplex,multi cores.OS2,OS1,OM1,OM2,OM3,OM4,for 10G/40G/100G applications.

MTP is the high dense degree of optical fiber pre-connect system,which is generally use in three areas:The Data Center application with high dense degree environment
The optical fiber to the building
The internal connector application in fiber equipment.

huihongfiber's MTP fiber patch cable is compliant to IEC-61754-7 and TIA-604-5(FOCIS-5)standard.It can be widely used for10G upgrade to 40G/100G data center.
MTP Connector

MTP Male with Pins	MTP Female without Pins
Two other clearly visible features are the noses and guide grooves(keys)on the top side.The Female and Male need to be used together.

Pre-terminated MTP Technology-Polarity Type B(Cross)
The application above is for the MTP-LC harness cable connecting a QSFP+port to(4)SFP+ports directly.

In many existing DC environments,LC-MTP cables are used to support high density fiber trunks between switches,rack patch panels and main distribution cabling panels(MDA).

For example:
The above is the Eight-Fiber MTP-LC Assembly uses a pinless connector on one end for interfacing with the QSFP port on the Cisco Nexus 6000series,The other end contains four LC uniboot connectors,which provide connectivity to the SFP+ports on the switch.The polarity of the assembly pairs the fibers from the MTP Connector from the outside to the inside;thus,fiber 1 and fiber 12 are a duplex pair,as are fiber 2 and fiber 11,etc.

Assembly Structure Illustration
12-Fiber Mini-Core Cable structure
MTP Hybrid Harnesses Fiber Patch Cables are terminated with MTP connector on one end and other end with LC,FC,SC,ST,or MTRJ connectors to meet a variety of fiber cabling requirements.
1.The default diameter of the MTP cable is 3.0mm.
2.The diameter of branch cable could be choose as 0.9mm,2.0mm,please kindly contact us at [email protected] for other diameter standard.
3.huihongfiber can also custom the pulling eyes,welcome to contact us if you need.
We ensure the high quality of our MTP fiber optic patch cables:
1. we use High-performance polishing equipment, and complemented by precision plates holders designed for MT ferrules.
2. our 3D interferometer are used in verification of MTP polishing process, making all parameters of the polished MT ferrule complies and exceeds industry standards.
3.The flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber cores cable assemblies.