12 Core Fiber Optic Terminal Box  

The 12 core fiber optic terminal box is a fiber optic cable management products used on the terminal of the optical cables, different typed and structures, the diameter of which are within 18mm (Φ) tray. The 12 core fiber optic terminal box is light in weight and small size, flexible to use in different applications in optical cabling.

Installation of the fiber optic terminal box:
Peel the cable, take off the outer and inner housing, as well as loose contract tube, and wash off the filling grease, leaving 1.1~1.6m fiber and 20~40mm steel core.
Fix the cable-pressing card and the cable, as well as the cable reinforce steel core.
Lead the fiber into the melting and connecting tray, fix heat contract tube and melted tube to one of the connecting fiber. After melting and connecting the fiber, move heat contract tube and melted tube and fix the stainless (of quartz) reinforce core stick. Make sure the connecting point is the middle of the housing pipe. Heat the pipe to make the two into one. Put the protected joint into the fiber-laying tray. (One tray can lay 12 cores).
Lay the left fiber in the melting and connecting tray evenly, and fix the winding fiber with nylon ties. Use the trays from the bottom up. After all the fiber has been connected, cover the top layer and fix it.
Position it and use the earth wire in accordance with the project plan.
Close the cover. It can be installed on the wall or in horizontal line.